Home|Contact us
  • 1
  • 2
  • 3
  • 4
  • 5
Welcome to load website www.ductingmachine.com!....
Your present location:Home > Product center PRODUCT CENTER
CNC Plasma Cutting Machine

 

Plasma Cutter Machinery for Manufacture of Spiral Round Air-condition Spiral tubes fittings

This type CNC control plasma cutting machine is special designed for HVAC Ducting or sheet metal process industry.  It takes the advantages of both working in house and out site, and strictly meets the requirement of our customers. The frame is steady due to the use of standard steel welding pipes to guarantee the plasma cutting machine stable running. The high precision rails (in x- axes and y- axes) are all imported from Taiwan. The error between the two rails in x- axes is less than ±0.05 mm, and the uprightness error between x- axes and y- axes is less than ±0.05. The machining speed is from 1 to 26.4 meters per minute. It ensures the cutting quality.


Plasma Cutter machine specifications

l   The plasma cutter machine Control system is consisted of the mainframe unit. Mainframe, CPU, Numerical control interface card, input/output interface card, etc.

l   The Drive system is imported from Mitsubishi (Japan) with good heat dispersion, less fault, high resolving power in coder (4 times compared with medium-sized). It ensures the cutting quality.

l   The automatic regulatory height system has two parts, capacitance series and arc press series.

l   Air passage system is made from steady pneumatic reversing valve and magnetic pneumatic cylinder.

l   Plasma generator on this machine is from HYPERTHERM (USA). It performances steady and ensures the cutting quality.

l   Software for the plasma cutting machine can be optional, normally we have two software for client choice, Lantex software and software of PM2000.


Plasma Cutter machine main technology parameters

Model

Cutting sizes

W * L (mm)

Capacity

(mm)

Cutting speed

(m/min)

Weight

(kg)

Dimension

L* W*H (mm)

PC-3100

1300x 3100

0.4-6

1-12

940

4100×2000×1250mm

PCD-3100

1550 x 3100

0.4-6

1-12

1030

4100×2300×1250mm

PC-5100

1300 x 5100

0.4-6

1-12

1100

6100×2000×1250mm

PCD-5100

1550 x 5100

0.4-6

1-12

1300

6100×2300×1250mm


Plasma Cutter machine Source requirement

l   Power requirement

Power supply: 380 volts three-phase or 220 volts three-phase, 4 A alternating current

Voltage generator: 220-380V volts, 20-60A alternating current

Power: 40-120KW

l   Gas source requirement

Flux 0.5m³/min; Pressure ≥0.6MPa


Ducting software



Related Products :

+ PRODUCTS LIST

Add: No.44 Lidu city garden, Jiangyin          City, Jiangsu China
Tel: +86-510-86251926;
        +86-512-58162555
Fax: +86-512-58162928
Mobile phone: 0086-13915206868

Home|Contact us © 2014 Jiangyin JACK-AIVA Machine Co., Ltd. All Rights Reserved